Wuxi Lemar Metal Products Co.,Ltd

 

 

 

The stainless steel L Bolt is a uniquely shaped fastener that resembles the letter L. This type of bolt is commonly used in construction and engineering applications where a strong and reliable connection is required. L-shaped bolts are made of high-quality materials such as steel, stainless steel, and titanium. It's also available in a variety of sizes and lengths to suit different applications and projects, and the unique L-shaped screw anchor bolt ensures the bolt stays securely in place and prevents it from loosening or slipping over time.

 

1. One-time burying method: When pouring concrete, bury the anchor bolts. When high towers are controlled by overturning, the anchor bolts should be buried once.

2. Reserve hole method: put the equipment in place, clean the holes, put the anchor bolts into the holes, position the equipment and then pour it with non-shrink fine stone concrete that is one level higher than the original foundation, and tamp it tightly. . The distance from the center of the once-buried anchor bolt to the edge of the foundation should not be less than 2d (d is the diameter of the anchor bolt), and should not be less than 15mm (when d≤20 should not be less than 10mm), and should not be less than half the width of the anchor plate Add 50mm. When the above requirements cannot be met, appropriate measures should be taken to strengthen them. The diameter of structural anchor bolts should not be less than 20mm. When subjected to earthquake action, double nuts should be used for fixation, or other effective measures to prevent loosening should be adopted, but the anchoring length of the anchor bolts should be 5d longer than the anchorage length without earthquake action.

 

 

 

 

 

 

 

http://www.lemarmetal.com/